The latest Citrix Certification 1Y0-A28 exam training methods

We are all ordinary human beings. Something what have learned not completely absorbed, so that wo often forget. When we need to use the knowledge we must learn again. When you see IT-Tests.com's Citrix 1Y0-A28 exam training materials, you understand that this is you have to be purchased. It allows you to pass the exam effortlessly. You should believe IT-Tests.com will let you see your better future. Bright hard the hard as long as IT-Tests.com still, always find hope. No matter how bitter and more difficult, with IT-Tests.com you will still find the hope of light.

IT-Tests's products can not only help customers 100% pass their first time to attend Citrix certification 1Y0-A28 exam, but also provide a one-year of free online update service for them, which will delivery the latest exam materials to customers at the first time to let them know the latest certification exam information. So IT-Tests.com is a very good website which not only provide good quality products, but also a good after-sales service.

You can free download part of practice questions and answers about Citrix certification 1Y0-A28 exam to test our quality. IT-Tests.com can help you 100% pass Citrix certification 1Y0-A28 exam, and if you carelessly fail to pass Citrix certification 1Y0-A28 exam, we will guarantee a full refund for you.

Exam Code: 1Y0-A28
Exam Name: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 123 Questions and Answers
Last Update: 2014-02-01

The exam questions and answers of general Citrix certification exams are produced by the IT specialist professional experience. IT-Tests.com just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our IT-Tests's practice questions and answers have 100% accuracy. Purchasing products of IT-Tests.com you can easily obtain Citrix certification and so that you will have a very great improvement in IT area.

IT-Tests.com Citrix 1Y0-A28 exam training materials praised by the majority of candidates is not a recent thing. This shows IT-Tests.com Citrix 1Y0-A28 exam training materials can indeed help the candidates to pass the exam. Compared to other questions providers, IT-Tests.com Citrix 1Y0-A28 exam training materials have been far ahead. uestions broad consumer recognition and reputation, it has gained a public praise. If you want to participate in the Citrix 1Y0-A28 exam, quickly into IT-Tests.com website, I believe you will get what you want. If you miss you will regret, if you want to become a professional IT expert, then quickly add it to cart.

1Y0-A28 (Implementing NetScaler 10 for Networking and Traffic Optimization) Free Demo Download: http://www.it-tests.com/1Y0-A28.html

NO.1 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix   1Y0-A28 test   1Y0-A28 test answers
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix   1Y0-A28   1Y0-A28 demo   1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix   1Y0-A28   1Y0-A28   1Y0-A28
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix   1Y0-A28   1Y0-A28   1Y0-A28
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix   1Y0-A28   1Y0-A28   1Y0-A28
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix certification   1Y0-A28 answers real questions   1Y0-A28 certification training   1Y0-A28 study guide
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix questions   1Y0-A28   1Y0-A28
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   1Y0-A28   1Y0-A28

NO.2 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix   1Y0-A28 original questions   1Y0-A28 original questions   1Y0-A28

NO.3 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix   1Y0-A28   1Y0-A28   1Y0-A28   1Y0-A28 exam

NO.4 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrix   1Y0-A28   1Y0-A28 test answers   1Y0-A28

NO.5 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix dumps   1Y0-A28   1Y0-A28   1Y0-A28 test questions

IT-Tests.com offer the latest 3I0-012 Questions & Answers and high-quality 70-415 PDF Practice Test. Our MB3-700 VCE testing engine and HP2-N43 study guide can help you pass the real exam. High-quality VCAC510 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/1Y0-A28.html