JN0-694 practice tests

Now passing Juniper certification JN0-694 exam is not easy, so choosing a good training tool is a guarantee of success. IT-Tests.com will be the first time to provide you with exam information and exam practice questions and answers to let you be fully prepared to ensure 100% to pass Juniper certification JN0-694 exam. IT-Tests.com can not only allow you for the first time to participate in the Juniper certification JN0-694 exam to pass it successfully, but also help you save a lot of valuable time.

IT-Tests.com provide different training tools and resources to prepare for the Juniper JN0-694 exam. The preparation guide includes courses, practice test, test engine and part free PDF download.

IT-Tests.com not only have a high reliability, but also provide a good service. If you choose IT-Tests, but don't pass the exam, we will 100% refund full of your cost to you. IT-Tests.com also provide you with a free update service for one year.

Exam Code: JN0-694
Exam Name: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 36 Questions and Answers
Last Update: 2014-04-14

We should use the most relaxed attitude to face all difficulties. Although Juniper JN0-694 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because IT-Tests.com's Juniper JN0-694 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. IT-Tests.com's Juniper JN0-694 exam training materials is the best medicine for candidates.

There are a lot of sites provide the Juniper JN0-694 exam certification and other training materials for you . IT-Tests.com is only website which can provide you Juniper JN0-694 exam certification with high quality. In the guidance and help of IT-Tests.com, you can through your Juniper JN0-694 exam the first time. The questions and the answer provided by IT-Tests.com are IT experts use their extensive knowledge and experience manufacturing out . It can help your future in the IT industry to the next level.

The exam questions and answers of general Juniper certification exams are produced by the IT specialist professional experience. IT-Tests.com just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our IT-Tests's practice questions and answers have 100% accuracy. Purchasing products of IT-Tests.com you can easily obtain Juniper certification and so that you will have a very great improvement in IT area.

JN0-694 (Enterprise Routing and Switching Support, Professional (JNCSP-ENT)) Free Demo Download: http://www.it-tests.com/JN0-694.html

NO.1 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper   JN0-694 certification   JN0-694 demo   JN0-694 exam simulations   JN0-694 certification

NO.2 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

Juniper   JN0-694 exam simulations   JN0-694   JN0-694

NO.3 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper exam simulations   JN0-694   JN0-694 answers real questions

NO.4 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper exam   JN0-694   JN0-694 demo   JN0-694

NO.5 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper   JN0-694 certification training   JN0-694 test

NO.6 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper   JN0-694   JN0-694 answers real questions   JN0-694

NO.7 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

Juniper   JN0-694   JN0-694 original questions

NO.8 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper certification training   JN0-694 test   JN0-694   JN0-694 test questions   JN0-694 practice test

IT-Tests.com offer the latest ACMA_6.1 Questions & Answers and high-quality 000-502 PDF Practice Test. Our HP2-N40 VCE testing engine and 70-687 study guide can help you pass the real exam. High-quality M2020-623 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-694.html