Juniper JN0-532 questions and answers

If you don't purchase any course, although you spend a lot of time and effort to review of knowledge to prepare for Juniper certification JN0-532 exam, it is still risky for you to pass the exam. But selecting IT-Tests's products allows you to spend a small amount of money and time and safely pass the exam. I believe that IT-Tests.com is more suitable for your choice in the society where time is so valuable. Moreover, our IT-Tests.com a distinct website which can give you a guarantee among many similar sites. Choosing IT-Tests.com is equivalent to choose success.

A lot of my friends from IT industry in order to pass Juniper certification JN0-532 exam have spend a lot of time and effort, but they did not choose training courses or online training, so passing the exam is so difficult for them and generally, the disposable passing rate is very low. Fortunately, IT-Tests.com can provide you the most reliable training tool for you. IT-Tests.com provide training resource that include simulation test software, simulation test, practice questions and answers about Juniper certification JN0-532 exam. We can provide the best and latest practice questions and answers of Juniper certification JN0-532 exam to meet your need.

If you want to through the Juniper JN0-532 certification exam to make a stronger position in today's competitive IT industry, then you need the strong expertise knowledge and the accumulated efforts. And pass the Juniper JN0-532 exam is not easy. Perhaps through Juniper JN0-532 exam you can promote yourself to the IT industry. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose IT-Tests.com's Juniper JN0-532 exam training materials. This is training product that specifically made for IT exam. With it you can pass the difficult Juniper JN0-532 exam effortlessly.

IT-Tests.com is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because IT-Tests.com has a strong IT team of experts, they are committed to study exam questions and answers, and serve the vital interests of the majority of candidates. They use their own professional mind and experience to meet the needs of the candidates. According to the needs of the candidate, they consider the issue from all angles, and manufacturing applicability exam training materials. This material is Juniper JN0-532 exam training materials, which including questions and answers.

In life we mustn't always ask others to give me something, but should think what I can do for others. At work if you can create a lot of value for the boss, the boss of course care about your job, including your salary. The same reason, if we are always a ordinary IT staff, yhen you will be eliminated sooner or later . We should pass the IT exams, and go to the top step by step. IT-Tests.com's Juniper JN0-532 exam materials can help you to find shortcut to success. There are a lot of IT people who have started to act. Success is in the IT-Tests.com Juniper JN0-532 exam training materials. Of course you can not miss it.

Exam Code: JN0-532
Exam Name: Juniper (FWV,Specialist (JNCIS -FWV))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 146 Questions and Answers
Last Update: 2014-01-02

IT-Tests.com promise that we will spare no effort to help you pass Juniper certification JN0-532 exam. Now you can free download part of practice questions and answers of Juniper certification JN0-532 exam on IT-Tests. When you select IT-Tests, you can not only pass Juniper certification JN0-532 exam, but also have one year free update service. IT-Tests.com can also promise if you fail to pass the exam, IT-Tests.com will 100% refund.

IT-Tests.com senior experts have developed exercises and answers about Juniper certification JN0-532 exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use IT-Tests's products, IT-Tests.com can help you 100% pass your first time to attend Juniper certification JN0-532 exam. If you fail the exam, we will give a full refund to you.

JN0-532 (FWV,Specialist (JNCIS -FWV)) Free Demo Download: http://www.it-tests.com/JN0-532.html

NO.1 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper   JN0-532 certification   JN0-532 dumps

NO.2 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper original questions   JN0-532 certification   JN0-532 study guide   JN0-532

NO.3 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper certification   JN0-532   JN0-532 exam dumps

NO.4 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper exam simulations   JN0-532 test   JN0-532 questions   JN0-532   JN0-532

NO.5 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper   JN0-532 questions   JN0-532 test

NO.6 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper   JN0-532   JN0-532 braindump   JN0-532   JN0-532 test answers

NO.7 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper test questions   JN0-532 original questions   JN0-532 test answers   JN0-532

NO.8 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper exam prep   JN0-532   JN0-532 exam   JN0-532

NO.9 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper   JN0-532 braindump   JN0-532 certification training

NO.10 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper   JN0-532 study guide   JN0-532 exam prep   JN0-532   JN0-532

NO.11 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper   JN0-532 pdf   JN0-532   JN0-532

NO.12 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532 demo   JN0-532   JN0-532 test questions

NO.13 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532 pdf   JN0-532   JN0-532   JN0-532 test answers

NO.14 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper   JN0-532   JN0-532   JN0-532 pdf

NO.15 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper   JN0-532 answers real questions   JN0-532   JN0-532   JN0-532

NO.16 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper   JN0-532 exam dumps   JN0-532   JN0-532   JN0-532 questions

NO.17 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper   JN0-532   JN0-532   JN0-532 test questions

NO.18 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper practice test   JN0-532 study guide   JN0-532 exam prep   JN0-532   JN0-532

NO.19 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper questions   JN0-532   JN0-532 exam dumps   JN0-532   JN0-532   JN0-532

NO.20 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper original questions   JN0-532 practice test   JN0-532 exam dumps   JN0-532   JN0-532 test   JN0-532

IT-Tests.com offer the latest HP2-H29 Questions & Answers and high-quality 70-321 PDF Practice Test. Our JK0-U11 VCE testing engine and 000-614 study guide can help you pass the real exam. High-quality 70-460 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-532.html